The following vehicles are currently supported by projectLAMBDA Tuner. If you do not see your vehicle on the list, you can always request for us to add support for it. The Lambda Tuning hardware and software can work with almost every Phase 2 EJ engine and many FA/FB engines.
USDM:
- Subaru Forester 1999 – 2004, EJ251, EJ253
- Subaru Forester XT 2004 -2013 , EJ255
- Subaru Impreza 1999 – 2004, EJ223, EJ251, EJ253
- Subaru Impreza WRX/STI 2004 – 2021, EJ255, EJ257 (Please request if your year is not available in the software)
- Subaru Legacy/Outback 2000 – 2004, EJ251 (EJ252 5MT not supported)
- Subaru Legacy GT/Outback GT, 2005 – 2009, EJ255
- Subaru Baja 2003 – 2005, EJ251
- Subaru Baja Turbo 2004 – 2006, EJ255
JDM:
- Subaru Forester SF5 S/Tb, T/Tb, STI 1999 – 2001, EJ205
- Subaru Forester SG9 STI 2004 – 2007, EJ255
- Subaru Impreza GF8 WRX 1998 – 2000, EJ205
- Subaru Impreza GC8/GF8 WRX/WRX STI 1998 – 2000, EJ207
- Subaru Legacy BE5/BH5 B4 RSK/GT 1998 – 2001, EJ206, EJ208 (except Applied Model Revision D)
- Subaru Legacy BE5/BH5 B4 RSK/GT 1998 – 2001, EJ208
- Subaru Legacy BL5/BP5 2.0GT/Spec B 2003 – 2008 , EJ20X, EJ20Y
EDM:
- Subaru Forester 2004, EJ251
- Subaru Forester S 1999 – 2001, EJ205
- Subaru Impreza 1999 – 2005, EJ161, EJ201,
- Subaru Impreza GT 1998 – 2000, EJ205
ADM:
- Subaru Impreza 1999 – 2005, EJ161, EJ201, EJ251
- Subaru Liberty/Outback 1998 – 2003, EJ201, EJ251
If your car is not on the above list, your ECU may still be compatible with our Tuner. You can identify what type of ECU you have by the part numbers on the label and also by the connector configuration.
This ECU is used in USDM, EDM and possibly some JDM NA applications. It has 3 connectors. They are manufactured by Automotive Electronic Control Systems Inc. and Unisia JECS Corporation.
NOTE: Some 1999 – 2001 ECUs will have the same connector but are manufactured by Denso. These ECUs are internally different and not supported yet.
This ECU is used in JDM turbo applications. It has 4 connector positions but only 3 are populated with pin contacts. They are manufactured by Unisia JECS Corporation.