Release Notes
1.6.13.2
Feb 8 2022
- New feature: Return ECU to OEM firmware
- Bluetooth Tuner firmware update revision 7, improved signal range and some minor fixes.
- MY2003 - 2004 DBW Turbo flash write bug fix.
- Improved DTC reading for CAN ECUs
- EJ205/EJ207: New proportional boost control option
- EJ205/EJ207: Per cylinder spark timing compensation, boost target maximum increased to 5 bar
- EJ205/EJ207: Add fuel pump duty settings, traction control maps
- EJ205/EJ207: Add coolant temperature and startup fuel compensation maps
- EJ20X/Y: Added rear O2 trim limits
- Added 2000 EDM (Brazil) Legacy EJ251
- Added 2003/2004 USDM Forester EJ251
- Added 2004 USDM Impreza EJ251
- Added 2004 USDM Legacy/Outback EJ251
- Added 2004 ADM Forester EJ251
- Added 2005 EDM Impreza EJ201
- Added 2006 JDM Legacy EJ20Y
- Added 2007 ADM Impreza EJ201
- Added 2008 USDM WRX STI EJ257
- Added 2011 USDM Impreza WRX EJ255 MT
- Added 2013 USDM WRX STI EJ257
- Added 2015 USDM WRX STI EJ257
- Added 2017 USDM Impreza XV FB20B MT
- Added 2018 USDM WRX STI EJ257
- Added 2020 USDM WRX STI EJ257 with launch limiter
1.5.33.4
June 7 2022
- Added AE591 EDM Impreza EJ161
- Added 2002 EDM Impreza EJ161
- Added 2003 USDM Impreza EJ251
- Added BL9A/BP9A USDM Legacy/Outback EJ255
- Added 2011 ADM WRX EJ255
- Added VAFC 2017 USDM WRX STI EJ257
- Added VAFG 2021 USDM WRX STI EJ257
- EJ205, EJ206, EJ207, EJ208: Added boost target and wastegate duty update interval
- EJ205, EJ206, EJ207, EJ208: Option to replace narrowband O2 with 0 - 5V wideband O2
- EJ205, EJ207: Speed density Mode
- USDM EJ251: Updated incorrect temperature sensor scaling
- EDM EJ161, EJ201: Can now read complete firmware for unknown firmware IDs
- Fixed incorrect identification of BL5A/BP5A JDM Legacy EJ20Y
- Note: BL5A/BP5A and SG5A flash write bug causes read error after erase. Write can be completed after retrying multiple times.
1.5.30
Feb 06 2022
- Added GC8F JDM WRX EJ207 (AE480)
- Added BE5E/BH5E EDM Legacy EJ201 (AH242)
- Added BL5A/BP5A JDM Legacy EJ20X/EJ20Y (A2ZJ012A, A2ZJ012B)
- Added BL9A USDM Legacy EJ253 (E2ZJ173B)
- Added SF5C EDM Forester EJ205 (AE901, AG060)
- Added SG5A EDM Forester EJ201 (AG601)
- Added SG9C/D/E/F JDM Forester STI EJ255
- Added SG9C USDM Forester EJ253
- EJ201 CEL disables for AH311, AJ161
- EJ251 CEL disables for AG51E, AG53E, AH04F
- AF052, AG132, AF671, AG710, AG980 increased VE limit to 200%. 200g/s airflow limit still in effect
1.5.22
25 Jul 2021
- Added BE9D/BH9D/BT9D USDM Legacy/Outback/Baha EJ251 (AH04F, AH05F)
- Added BP9A/BL9A USDM Legacy EJ255 (A2WC522N)
- Added BP5C/BL5C JDM Legacy EJ20X/EJ20Y (A2WD012A, A2WD012B)
- Added BP5D/BL5D JDM Legacy EJ20X (A2UI000A)
- Added MY2019 USDM WRX STI (AE5Z321V)
- MY98-01 JDM turbo ECUs: Added boost target and wg duty max logging
- JDM EJ205/EJ207: Patched to allow editing wastegate duty frequency
- Fixed Innovate MTS logging crash
1.5.16.1
20 Mar 2021
- Added USDM Impreza EJ22 (AE510)
1.5.15
13 Mar 2021
- Added JDM GF8G WRX EJ205 (AE491)
- Added EDM SG5B EJ201 (AJ161)
- 2010 USDM EJ253, added injector small pulse width compensation
1.5.12
1 Mar 2021
- Reduced anti-virus false positive detection
- Added AE490 JDM GF8 WRX EJ205
- Added JDM SF5 STI Type 2 (AG380STI)
- Added AG51E, AG53E USDM MY02 Legacy/Outback EJ251, WARNING: No recovery method available yet
- Added EZ1GB10L USDM MY2010 Forester EJ253 AT
- Added EZ1GB10G USDM MY2010 Impreza MT
- Added AZ1U100s JDM VABF WRX STI
- Enabled read/write for EJ201
- JDM EJ205/EJ207 ECU, added cranking fuel compensation maps
- JDM EJ205/EJ207 ECU, added gear position logging
- Some corrections to datalogging parameters for MY08+
- Injectory latency comments were incorrect
- Better detection of Innovate Logworks install location
1.5.7.1
26 May 2020
- Added live map tracing
- Added more knock maps, ability to increase knock logging rate
- Added immobilizer switch to ADM, EDM, JDM, UKDM ECUs
- Added JDM EJ206 AD971, AF333
- EJ206: Added switch to disable TCU-related secondary spool. Not used in some BE5A/BH5A ECUs
- JDM: ECU shutoff allowed after test write
- MY98-02, fixed problem exiting flash mode when OEM tune is not modified
- Bug fix: Tune files work with non-English languages
1.5.4.2
08 Apr 2020
- Bug fix: Read error while trying to reflash some JDM ECUs
1.5.4
10 Mar 2020
- Serial wideband logging for AEM, Innovate, PLX, Zeitronix
- New ECU calibration search interface for File->New
- Fixed CEL reading for non-OBD2 ECUs to interprets stored codes correctly
- Update to flash voltage detection
- Tune format changed from XML to JSON. NOTE: Not backwards compatible.
- 98-02: Reflash mode now prevents shutoff if ECU not programmed correctly
- 99 USDM: Added flex fuel to all ECU's ending with 'X'.
- 99 USDM: Added O2 heater power limits
- AE850X: Added wideband O2 voltage patch.
- Added AF181, BE5A JDM EJ206
- Added AE830, SF5B JDM EJ205
- Added AE900, SF5B EDM EJ205
- Added AG710, GD ADM EJ251
- Bug fix: Stock firmware reported as modified when reading ECU
- Bug fix: Some datalogging parameters missing during offline configuration
1.4.5.0
14 Nov 2019
- CANbus Bluetooth speed improvement
-
New ECUs supported
- 99 Impreza EJ161 EDM
- 99-01 Legacy EJ201 ADM
- 01 Impreza EJ201 ADM
- License data is saved in tune when reading from ECU
- 99-02 USDM ECUs: Added misfire detection maps and logging parameters
- 99 USDM ECUs: Updated CEL definitions
- AE850, AE850X: Live edit enabled for injector end angle
- AE850X: NEW Flex Fuel support
- 98-01 JDM EJ206/EJ208: Updated EVC duty and secondary spool map defintions
- Bug fix: Multiple crashes in Logging Profile Window
1.4.2.5
19 Apr 2019
- Fixed erroneous 'Checksum failed' on flash read
- CAN ECUs: Flash read/write initialization fixed
- AF403: Added firmware support
- AG980: Added live tuning. Fixed 'incompatible ECU' message on flash write
- AH960, AF402, AF404, AG025, AG036, AG391, AG402: Rear O2 - Maximum STFT incorrect index fixed. Any tunes based on these firmware revision should be checked.
1.4.2.2
13 Mar 2019
- Fix for ECU not detected error on connection attempt (K-line)
1.4.1
26 Feb 2019
-
EJ205/EJ206/EJ207/EJ208 JDM
- Added launch mode with spark retard
- Added/updated decel fuel cut maps
- EJ206: Added AD982 ECU
- EJ207: Added AE481 ECU, updated AG340
- EJ208: AG302 superceded by AG303
-
EJ251 USDM
- Added: 2-step rev limiter
- Added: Current gear detection map and logging parameter
- Added: Spark maps - Minimum, Intake air temperature compensation
- Added: deceleration fuel cut delays
-
EJ253 USDM (MY1999)
- Added: 2-step rev limiter
- Added: Spark maps - Minimum, Intake air temperature compensation
- Added: deceleration fuel cut delays
1.3.5
3 Oct 2018
-
JDM Turbo
- Fixed: EJ205/EJ207 MT speed limiter missing
- Fixed: EJ206/EJ208 rev limiter definitions incorrect, check previous tunes before reflashing
- Added: Better descriptions for speed and rev limiters
1.3.4
3 Sep 2018
- New: Live tuning reads are tracked by undo history.
-
EJ251 USDM
- Added: AF408X-MT/AT definitions
- Fixed: Incorrect AF404 map definitions
1.3.3
17 Aug 2018
- New: Auto updating enabled
-
EJ205, EJ206, EJ207, EJ208
- Patched: Boost target and wastegate duty cycle maps are now interpolated
1.3.2.11
13 Aug 2018
-
EJ223, EJ253
- Added: Closed loop fueling enable temperature
-
EJ251 EDM
- Added: Transition fueling
1.3.2.10
08 June 2018
- Fix: Sometimes flash erase operation response incorrectly interpreted as failed
1.3.2.8
06 June 2018
- New: Allow cross-flashing firmwares between ECUs with same MCU type
-
EJ205, EJ206, EJ207, EJ208
- Added FPC, COP config options to JDM ECUs
1.3.2.7
4 Apr 2018
-
EJ251 USDM
- Added: BE/BH firmware AD84Cb
- Patched: Volumetric efficiency limit increased from 100% to 200%
1.3.2.6
18 Mar 2018
-
EJ253
- Added power mode fuel ratio blend step
-
EJ251 USDM
- Added: Power mode fuel ratio blend step
-
EJ251 EDM
- Added: MAP sensor offset
- Added: Power mode fuel ratio blend step
- Added: Throttle position, airflow data logging
1.3.2.4
23 Feb 2018
-
EJ206, EJ208
- Added: Firmware AG972, AF330, AG293
- Fixed: Renamed power mode fuel ratio maps to indicate primary and secondary mode
- Fixed: AF331 MAP sensor scaling values were incorrect
- Fixed: AD985, AG292 some maps were incorrect
-
EJ251
- Fixed: Volumetric efficiency map glitch at transitions above 100%
1.3.2.1
8 Feb 2018
-
EJ251 USDM
- Added: GD firmware AF407
- Known Issue: Volumetric efficiency map glitch at transitions above 100%
1.3.2
27 Jan 2018
- Fixed: Momentarily slow datalogging on connection
- Fixed: Trouble code reading
- New: JDM ECUs blink CEL while in flash mode
-
EJ205, EJ207
- Added: Idle maps
- Added: Closed throttle spark timing
- Added: Deceleration fuel cut
-
EJ251 USDM
- Patched: Volumetric efficiency limit increased from 100% to 200% (-X firmware only)
- Patched: Removed 200 g/s airflow limit
- Added: SF firmware AG036, AG037
- Added: SG firmware AG402, AG403
- Fixed: AG036 Volumetric efficiency atmospheric pressure bias axes swapped
1.3.1
26 Dec 2017
-
EJ251 USDM
- Added: MAP sensor signal smoothing
-
EJ223, EJ253 USDM
- Added: Coolant fuel compensation
- Added: Idle air maps